FS安全滑触线

您现在的位置是:首页 - 产品中心

FS安全滑触线

FS 安全滑触线

马托克滑触线系统可应用于不同行业和领域,安全滑触线系统是一款安全的动力供电系统,其持续电流可达1000A,主要应用于恶
劣的环境应用中,例如:桥式起重机、门式起重机、斗轮机、焦化设备、电动葫芦等。
安全滑触线系统是一款良好的绝缘性和安装紧凑的滑触线,安全滑触线可以根据客户不同的安装要求和工况环境,组装成不同极数,3极或5极并能集成化安装产品。

CONDUCTOR BAR SYSTEM

Magenetok Conductor Bar System can be used in different industries and fields.Safe conductor system is a safe power supply system with continuous current up to 1000A,mainly used in harsh environment applications, such as bridge crane, gantry crane, bucket, coking equipment,electric hoist etc..
Safe conductor system with good insulation and compact installation can be assemble to different number pole(the 3 pole or 5 pole)and integrated product installation according to the installation requirements of different customers and working conditions.

滑触线性能特点

块状设计确保集电器靴和滑触线之间有良好的电流接触。
滑触线盖子磨损可以最小化,因为形状设计引导脚部朝向中心。
接头电流接触的潜在损失可以显著减少。
刚性滑触线设计可以使挂钩之间的偏斜降到最小。

CONDUCTOR BAR FEATURES

Lumpy profile design ensures good electrical contact between the collector shoe and conductor bar.
Wear of the conductor bar cover is minimized because the profile guides the shoe towards the center.
Potential loss of electrical contact at joints is significantly reduced.
Rigid conductor bar design minimizes deflection between hangers.

易于安装和维护

模块化、插入式多极杆滑触线挂钩减少了安装和维护时间。
压缩式锚状挂钩(美国专利号)可以避免表面钻孔。
扩展线部分完全预先组装好。
仅需最小的系统维护⸺定期更换集电器刷头组件。

EASY TO INSTALL AND MAINTAIN

Modular, snap-in multi-pole conductor bar hangers reduce installation and maintenance time.
Compression-type anchor hangers (US Patent #6588713) eliminate field drilling.
Expansion line elements come completely pre-assembled.
Minimal system maintenance required—just periodically replace collector brush assemblies.
 

设计科学的包装运输和安装方案

490英尺长的系统不需要扩展组件就可以安装。
15英尺标准滑触线长度意味着仅需购买更少的接头。
普通挂钩和接头安装。
系统设计降低安装人工成本。

Design of packaging, transportation and installation

Systems up to 490 feet in length can be installed without expansion assemblies.
Standard 15’ bar lengths mean fewer joints to purchase.
Common hangers and joint assemblies.
System design reduces installation labor costs.
 

设计上考虑安全性

滑触线安全设计方面体现出最大限度地减少漏电保护。
接地滑触线有绿色盖子易于识别。

DESIGNED WITH SAFETY IN MIND

Safe design minimizes the potential for electrical contact.
Grounding conductor bar available with green cover for ease of identification.
 

可获得的各种配置

单个、串联头集电器组件。
90,110,125,250和400安培额定值。
插入式挂钩套件可应用于2,3和4杆。
单挂钩也可用于特殊配置。
可用多种集电器类型。
可用于水平或垂直安装应用。

AVAILABLE IN A VARIETY OF CONFIGURATIONS

Single and tandem shoe collector assemblies.
90, 110, 125, 250 and 400 Amp ratings.
Snap-in hanger kits available for 2, 3 and 4 pole applications.
Single hangers also available for special configurations.
Many collector styles available.
Can be used in horizontal or vertical mount applications.


Our standard FS Conductor Bar comes in 15’ lengths,so there are fewer joints to purchase and installation time is reduced!Systems may be installed up to 490’ without expansion assemblies, and in operating environments up to 160 degrees Fahrenheit. We include a green PVC conductor bar cover to provide electrical protection and easy identification of the grounding conductor.
Note It is permissible to use the smallest rated bar as the ground. 90, 110, and 125 Amp FS systems may use the90 Amp
FS Bar as the ground.On 400A systems, a 250A bar may be used as the grounding conductor.

FS滑触线标准长度为15英尺,可以减少接头购买和安装时间,滑触线系统可在没有扩展组件的情况下安装长达490英尺,并在高达华氏160度(71.1摄氏度℃)环境下进行操作。我们提供一个绿色PVC滑触线盖提供电气保护并用于简易识别。
注 允许使用最小功率滑触线作为接地。90、110、125、 F S系统可以使用90安培FS滑触线作为接地。在400A系统,250A滑触线可作为接地滑触线使用。


FS镀锌钢滑触线

Special length conductor bar are available from 1’ to 14’ in 1’increments designated by FS-(Amp Rating)(Phase or Ground)X, where X isequal to the length in feet.
Example: FS-90P5 is a 90 Amp FS Phase X 5’-0”

特殊长度滑触线可为1到14英尺间,由FS -(A M P 评级)指定1英尺增量(相位或地)x,其中x等于脚的长度。
例如:fs-90p5是90安培的FS滑触线相x 5“英尺- 0 ”英尺。


FS 铜滑触线

Special length line elements are available from 1’ to 14’ in 1’ increments designated by FS-(Amp Rating)(Phase or Ground)X, where X is equal to the length in feet.
Example: FS-250P5 is a 250 Amp FS Phase X 5’-0”. 3

特殊长度线元素可从1到14“由FS -(AMP评级)指定1增量(相位或地)x,其中x等于脚的长度。
例如:fs -250p5是250安培的electrobar FS相x 5“- 0 ”。